rssLink RSS for all categories
 
icon_red
icon_green
icon_red
icon_red
icon_red
icon_green
icon_green
icon_red
icon_red
icon_red
icon_orange
icon_green
icon_green
icon_green
icon_red
icon_blue
icon_red
icon_orange
icon_red
icon_red
icon_red
icon_red
icon_red
icon_red
icon_red
icon_red
icon_red
icon_orange
icon_green
 

FS#6093 — FS#9999 — p19-v1 et p19-v2 , adding card 6748

Attached to Project— Network
Modernization
paris 19
CLOSED
100%
We're going to add some 6748 cards to these chassis to replace the 6148s.

We will change all the cards on these 2 routers,
including the supervision cards.
Date:  Thursday, 23 January 2014, 06:50AM
Reason for closing:  Done
Comment by OVH - Monday, 13 January 2014, 15:46PM

we're starting with p19-v2-6k


Comment by OVH - Monday, 13 January 2014, 16:05PM

2 modules went into error which is affecting the traffic.

We are investigating.


Comment by OVH - Monday, 20 January 2014, 19:00PM

We will intervene tonight (20-21/01) on each router for a hardware+software update. Communications in progress will be affected when the 2 devices concerned are rebooted.


Comment by OVH - Tuesday, 21 January 2014, 00:49AM

we will start the intervention on p19-v2-6k


Comment by OVH - Tuesday, 21 January 2014, 01:45AM

We have replaced the sup720 and the 6748.
Therefore, the Firewall card is not booting, we will downgrade the chassis


Comment by OVH - Tuesday, 21 January 2014, 06:10AM

The card does not restart even after downgrading the chassis and setting the original cards. We have prepared a spare in Roubaix that will be ready tomorrow morning. So the operation will keep on standby and will be resumed tomorrow night.
First, we will set the firewall working on the p19-v2 with spare card then we can switch the traffic over and perform the soft/hard upgrades on the p19-v1.


Comment by OVH - Tuesday, 21 January 2014, 16:26PM

We are inserting the FW card of the spare into the chassis v2.


Comment by OVH - Wednesday, 22 January 2014, 01:55AM

We will start the intervention:
Fix the failover between 2 FWSM then replace the cards on p19-v1-6k


Comment by OVH - Wednesday, 22 January 2014, 01:55AM

the failover is fixed, we are starting the replacement on p19-v1-6k


Comment by OVH - Wednesday, 22 January 2014, 07:48AM

p19-v1-6k is now upgraded in sup720bxl and 6748.

However we have the same problem as the v2 last night, the firewall card doesn't boot anymore.
Traffic currently is flowing through the card FWSM of p19-v2-6k

voip is functional.


Comment by OVH - Thursday, 23 January 2014, 06:49AM

We finished the work tonight (22 to 23/01). It is about establishing the router uplinks p19-v1-6k that has caused a problem this morning and changing the queue settings on the links p19-v1<>p19-v2.